CLOSE
  • Construction Demolition and Recycling
  • Roofing and Siding Systems
  • Doors and windows
  • HVAC
  • Steel Building APAC
  • Kitchen and Bath Europe
  • Construction Interiors
  • Construction Demolition and Recycling Europe
  • Construction MENA
  • Architectural Glass
  • Modular and Prefab Construction
  • Construction Engineering Services
  • Safety and Compliance Europe
  • Wall Systems
  • Waterproofing APAC
  • Flooring System
  • Forensic and Owners Representative
  • Startups APAC
  • Architectural Glass APAC
  • Roofing and Siding Systems Europe
  • Marine Construction
  • Mechanical Electrical and Plumbing
  • Construction Bidding and Auctions
  • Architecture and Design Services
  • Concretes, Aggregates and Materials
  • Safety and Compliance APAC
  • Construction Demolition and Recycling APAC
  • Steel Building Europe
  • Construction Consulting
  • Roofing Systems APAC
  • Workforce Management and Staffing
  • Construction Latam
  • Landscaping
  • Construction Marketing
  • Modular Construction APAC
  • Modular Construction Canada
  • Construction Engineering MENA
  • Swimming Pool Construction
  • Surveying Canada
  • Construction Engineering Canada
  • Specialty Construction
  • Commercial Contractors
  • Scaffolding Contractors
  • Building Restoration and Maintenance
  • Doors and Windows Canada
  • Sustainable Construction APAC
  • Construction Law
  • Architectural Glass Canada
  • Building Information Modeling APAC
  • Construction Staffing
  • Insulation, Coating and Waterproofing
  • Cold Storage Construction Canada
  • Construction Management Canada
  • Swimming Pool Construction Canada
  • Scaffolding Canada
  • Flooring System APAC
  • Pre-Construction Services
  • Construction Staffing Europe
  • Precast Concrete Europe
  • Cold Storage Construction APAC
  • Apartment and Condominium Contractors Canada
  • MEP Canada
  • Foundation Construction Canada
  • Outdoor Construction
  • Construction Law APAC
  • Construction Saudi Arabia
  • MEP APAC
  • Decking Canada
  • Kitchen and Bath
  • Building Sealing Solutions Europe
  • Swimming Pool Construction APAC
  • Mould Remediation and Testing Europe
  • Mechanical Contractor Canada
  • Construction Consulting Europe
  • Construction Coating Europe
  • Landscaping Canada
  • Construction Management
  • Construction Management APAC
  • Flooring Systems Europe
  • Dummy
  • Commercial Contractors APAC
  • Commercial Contractors Europe
  • Concretes, Aggregates and Materials Europe
  • Concretes, Aggregates and Construction Materials APAC
  • Construction Cladding APAC
  • Concrete Canada
  • Residential Construction
  • Building Restoration and Maintenance Canada
  • Construction Interiors Europe
  • Modular and Prefab Construction Europe
  • Buinding Restoration and Maintenance Europe
  • Construction Forensic and Owners Representative Europe
  • Professional Services
  • Structures
  • Systems
  • Roofing and Siding Systems Canada
  • Professional Services Canada
  • Structures Canada
  • Systems Canada
  • Professional Services Europe
  • Structures Europe
  • Systems Europe
  • Training Services
  • Geotechnical Services Canada
  • Foundation Construction
  • Abatement Services
  • Screen Services
  • Architectural Fabrication Services
  • Construction Equipment
  • Exterior Construction
Skip to: Curated Story Group 1
Construction Business Review
US
EUROPE
APAC
CANADA
MENA
LATAM
AUSTRALIA
About Us Conference Partner With Us
  • US
    • US
    • EUROPE
    • CANADA
    • AUSTRALIA
  • Professional Services
    Abatement Services
    Architecture and Design Services
    Building Restoration and Maintenance
    Construction Bidding and Auctions
    Construction Consulting
    Construction Engineering Services
    Construction Equipment
    Construction Law
    Construction Management
    Construction Marketing
    Construction Staffing
    Forensic and Owners Representative
    Pre-Construction Services
    Scaffolding Contractors
    Training Services
  • Structures
    Commercial Contractors
    Construction Demolition and Recycling
    Construction Interiors
    Exterior Construction
    Foundation Construction
    HVAC
    Landscaping
    Marine Construction
    Mechanical Electrical and Plumbing
    Modular and Prefab Construction
    Outdoor Construction
    Residential Construction
    Specialty Construction
    Swimming Pool Construction
  • Systems
    Architectural Fabrication Services
    Architectural Glass
    Concretes, Aggregates and Materials
    Doors and windows
    Flooring System
    Insulation, Coating and Waterproofing
    Kitchen and Bath
    Roofing and Siding Systems
    Screen Services
    Wall Systems
  • Leadership Perspectives
  • Insights
  • Research
  • News
  • Magazines
  • CXO Awards

Thank you for Subscribing to Construction Business Review Weekly Brief

A featured contribution from Leadership Perspectives: a curated forum reserved for leaders nominated by our subscribers and vetted by the Construction Business Review Advisory Board.

Saudi Arabia

Rany Zammar, Director of Development

The Need for 3D Printing In the Construction Industry

Rany Zammar

Rany Zammar

Digital Construction Visionary

The increasing demand for residential units forced the engineers to become more creative in finding better ways to utilize the “time factor” in order to reduce the construction cost. Moreover, due to the global economic inflation resulting in the materials and land costs increase, they had to resort to technology to accelerate their planning and development strategies to give them the leading edge in a very competitive world, especially when aiming to deliver affordable housing.


Numerous options in the construction world have progressed largely in recent years, allowing machines to be introduced into building and erecting structures, also construction methods with reinforced concrete panels like precast and modular systems made it easier for the building components preparation offsite and introduced onsite for an easy assembly in a timely manner.


Although those systems are designed for fast and mass production, they have decent smooth finishing; however, they have limited the architect’s creativity because of their rectangular and rigid shapes that give the architectural volumes an industrial cold look.


Even though it became simpler and faster, the construction joints stayed visible on both sides of the walls and the ceilings and required additional craftsman work and decorative layers to enhance the interior and give it an elegant finishing.


When 3D printing was introduced into construction, it brought with it the options of customization, attractive modern designs with the possibility of printing inclined walls with wavy and curvy shapes, as well as a rapid deliverable on the project construction timeline. The architects regained with this option their creativity and it gave them more flexibility in the designs that they lost during the precast era.


This unconventional method takes time during the preparation of the layouts, for the precision that goes into the planning stage, especially with the MEP coordination that should be installed into the walls inbetween the two printed layers, however, the “printing of the project” is fast and straight forward, it also requires less human intervention and workers to complete the project, in comparison with the traditional construction methods.


The latest 3D printing advantages did not only help the architects by enabling them to design any shape horizontally and vertically but also later helped the investors and landlords who are now capable to use their full allowable build-up area on their residential expensive lands by printing not only one floor but stretching up to three floors in one setup of the 3D printer that can complete the residential villa for example in a couple of months including the finishing.


Considering how new this technology is, the engineers are facing multiple challenges, especially in the gulf area, to present to authorities a structurally viable and stable product in terms of loading capabilities, with code-compliant insulation types injected into the printed layers of the external walls and so on. For that reason, engineers opted to keep using the concrete reinforced columns inside the printed walls with the formwork being the wall's printed layers themselves until the end users and authorities become more familiar and trusting with the load barring walls as a stable structure without any columns as it is being used internationally.


Overall, 3D printing offers big promises for construction to be ignored, with its speed, waste reduction, design freedom, and fewer human errors, but it still needs a long way to become the exclusive construction method


The option of this load-bearing wall also has some disadvantages, especially on expensive lands with a small footprint, since the walls should be very thick with multiple printed layers inside it and that will make the internal livable areas of the rooms even smaller.


Overall, 3D printing offers big promises for construction to be ignored, with its speed, waste reduction, design freedom, and fewer human errors, but it still needs a long way to become the exclusive construction method, for it is still costly and needs some testing and adjustments to meet all the regulations criteria, still, it holds a lot of potential for the future.


The articles from these contributors are based on their personal expertise and viewpoints, and do not necessarily reflect the opinions of their employers or affiliated organizations.

Editorial Lens

Construction leaders continue to explore technologies that can address labor shortages, material waste and growing demands for project efficiency. This perspective offers industry readers a balanced view of why 3D printing deserves serious consideration while practical challenges around cost, regulation and adoption still require attention.

The Leadership Perspectives forum brings together voices shaping the construction industry. Participation is by invitation only. It features leaders who are not merely observing industry changes, but actively contributing to them through operational expertise and project execution insights.
EDITOR'S CHOICE
  • Willis Towers Watson

    Cushman & Wakefield [NYSE: CWK]

    Projects Today Come Down to Nerves of Steel and Realistic Expectations

    Jason D’Orlando, Senior Managing Director, and Michael Morehead, Senior Director, Project and Development Services - Industrial

  • Willis Towers Watson

    Walmart [NYSE: WMT]

    Navgating the Challenges and Innovations in Mega Construction Projects: Building Competent Leadership and Embracing Technological Trends

    Seth Roy, Senior Director - Design & Construction, Walmart [NYSE: WMT]

  • Willis Towers Watson

    Meritage Homes [NYSE: MTH]

    Act Now to Address Aging Workforce

    Poli Peters, VP of Operations

  • Willis Towers Watson

    Advanced Drainage Systems [NYSE: WMS]

    Walking the sustainability walk: The case for EPR

    Brian King, EVP Marketing, Product Management and Sustainability, Advanced Drainage Systems, Inc. [NYSE: WMS]

Construction Business Review
Follow on LinkedIn

About

  • Home
  • About Us
  • Partner With Us

Stay Connected

  • Subscribe
  • Newsletter
  • Sitemap

Contact Us

  • editor@constructionbusinessreview.com
  • sales@constructionbusinessreview.com
  • marketing@constructionbusinessreview.com

Legal

  • Editorial Policy
  • Privacy Policy
  • Terms of Use

© 2026 Construction Business Review. All rights reserved.

This content is copyright protected

However, if you would like to share the information in this article, you may use the link below:

https://german-apartment-and-condominium-contractors.constructionbusinessreview.com/cxoinsight/the-need-for-3d-printing-in-the-construction-industry-nwid-1509.html

We use cookies on this website to enhance your user experience. By clicking any link on this page you are giving your consent for us to set cookies. More info

I agree